Бетоноукладчик Gomaco 3300

GOMACO 3300 slipform paver

Year of manufacture: 2019

Serial number: 903100-362

Working hours: ~420 hours

Three-legged machine with a paving width of up to 3.5m full area

Paving in transport position and transverse

Incl. 3 pieces of farm tracks screeds up to 3.5m with vibrators

Engine: C3.4B diesel engine, Caterpillar- 120hp (93.3kW). Tier 4

Fuel tank, capacity: 265 liters

Hydraulic oil tank, capacity: 336.9 liters

Oil cooler

Eight hydraulic circuits

Automatic on/off switch for vibrators

- Synchronized with the machine movement

Hydraulic pump system

Fiberglass engine and control panel enclosure

- Improved visibility of the operator

- Better access to engine, pumps and valves

Operator station for left and right

- designed for easy monitoring of all hydraulic controls and electronic censoring functions as well as remote control of travel speed

G+ control panel and G+ Connect:

GOMACO's proprietary operating system - Handling is very user-friendly and easy to learn

- Self-diagnostic system with 165 mm (6.5 inch) anti-glare color and graphic display

- Pulse sensors in the crawler motors enable precise speed and distance measurement with various attachments.

- Detailed machine history

- 3D concreting systems are recognized immediately, which enables simple interface integration. Installation with 3D operating system is immediately recognized by the G+ system through intelligent interface integration

- Operating software can be operated in several languages

- e.g. English / German

GRD (Gomaco Remote Diagnostic System)

- Enables service personnel to access and check configuration parameters for fault diagnosis

- Remote setting of devices via GPS

- Transmission of GSI real-time data for optimum control of machine performance

- Notifications by e-mail on request

- Software updates

- Two-year license

Three mounted lifting legs

- with 914mm lifting cylinder

- 203mm manual adjustment

- 1,116mm total vertical adjustment

- with 180゜changeable drive

- Electronic rotation sensors for accurate track feedback

Hydraulic rear leg shift

- Power Slide for rear track positioning with intelligent cylinder to assist correct steering angle over the radius

- 1803mm side track movement for optimum machine balance.

Very stable front mold support left and right

frame

- right leg positioning:


- 422mm lateral hydraulic movement from outside to straight ahead

- 914mm lateral movement

- either left or right for kerb and gutter, barrier, slot drain, water channel, sidewalk

Hook & Go pull bar and additional bracket

- 457 mm pressure-compensated hydraulic height adjustment

and 660 mm manual height adjustment

- Total vertical adjustment 1117 mm

- 914 mm maximum hydraulic lateral adjustment

- With smart telescopic mold holder for repeatable mold changes

NOTE: A screed with a width of up to 2.5 m can be mounted on the right or left side of the standard 3300.

Mounted, foldable conveyor belt

- Hydraulically driven

- 5.64m between the central deflection rollers

- 610mm wide, vulcanized conveyor belt

- Variable speed regulation

- Lateral swivel bracket with hydraulic adjustment of the loading height

- hydraulic sideshift for the left or right side

- Hydraulic bracket for the standard auger conveyor

- vulcanized

- Conveyor belt protection

Emergency stop switch

Three crawler tracks - Series 1 with two-stage hydraulic motors

- Hydraulically driven with automatic tensioning

- Length 1.56m

- 300mm wide pads with road plates

- 100:1 reduction ratio

- Pave speed 0 to 15.1 mpm

- additional movement 0-40 mpm


Polyurethane trackpads

- 1 set

Hydraulic rotation drives

- with 180゜changing drive

- with electronic rotation sensors for accurate track feedback

High pressure water system

- Including 416 liter tank, adjustable high-pressure gun

- Pressure regulation from 0 to 140 bar

Lighting system for night operation

- Includes 4 LED lights, 9-32 V DC voltage, incl. attachment

The scope of delivery includes three paving molds:

1. Variable Farmway/ -road mold (year of manufacture: 2021)

Adjustment of track width and gap from outside to inside.
(Permanent total width of the mold: 3868mm; track width from 1000-1300mm;
intermediate track width of 800-1000mm)

- A transverse auger mounted on the hopper and driven by a chain
driven by a chain; drive unit without reduction gear.
- The concrete is fed into the hopper by means of the GT3300 conveyor belt.
- To achieve the different concrete strips with paving width, this requires
manual adjustment of the respective paving/track dimensions.
- Individual manual adjustment of the paving thickness of the tracks from at least
140 mm - 240 mm; stroke adjustment +80 / - 20 mm.
- Shape assembly and suspension in transport position included.
- Hydraulically operated - pressure-compensated side formwork
- 4 VIBRATORS included in the scope of delivery
(Straight design, almost unused/very little used)